Mitre Saw: Evolution
- Manufacture: Evolution
- Model Number: RAGE3-S300
- Asset ID: 0005
We have a Evolution Mitre Saw in the workshop. It is one of the bench mounted tools in the workshop This saw can cut materials with compound angles using its 255mm (10") blade.
~insert images~
Ownership
This machine is on long term loan from a member of the space. As such please treat the machine with respect and do not abuse/mistreat it, therapy is expensive.
Status & Operation
- Location: Woodwork (WoodyDusty)
- Operating: Yes
- Training: Woodwork - Basic Training & Safety Induction
- Lone Working: Allowed
- Materials: Wood
Features
The Mitre Saw is typically used to chop wood, however the blade can be changed to allow for other materials. This saw uses a 255mm diameter blade and has a maximum cross cut of 300 x 60mm due to slide carriage. The Saw has a maximum vertical axis angle of 45° and a maximum horizontal axis angle of 45° allowing for compound angles.
The Mitre Saw is mounted on the main workbench with the height set to allow for the surrounding bench to be utilised for support. Built into the work bench is T-slot track that allows members to attach various accessories & stop blocks to the benches. Members are required to ensure that when cutting, the material is firmly clamped in place.
Cutting Blade: - Diameter = 255mm - Bore = 24.5mm - Kerf = 1.7mm
As standard the space stocks a replacement blade for the machine. Damaged and broken blades should be reported to the Woodwork Team so that replacements can be acquired. Members requiring specialised blades can source them themselves.
https://www.screwfix.com/p/evolution-circular-saw-blade-255-x-25-4mm-28t/65166
Training
This machine is included in the general WoodyDusty Training & Safety induction, this can be completed either in person or via the Moodle course:
~insert link to Moodle course~
The training will cover the following: - Usage of the machine including workbench accessories - How check & identify the installed blade - How to change & replace the blade
Safety
When using the Mitre Saw PPE is mandatory and the dust extraction should be running. - Eye protection - Hearing protection - Dust mask (recommended)
During an emergency, if the workshop safety switches are triggered the machine will be disabled as power to the workshop will be stopped. Only board members have the ability to restore power to the workshops after these instances.
Risk Assessment
~insert link to Risk Assessment~
Manual
~insert link to Manual~ https://evolutionpowertools.com/downloads/manuals/build/rage3s/book1.pdf
Maintenance
Periodic maintenance is overseen by the Woodwork Team. Issues & faults can be reported to them though the WoodyDusty telegram group chat "Got Wood?". ~insert link to chat